EUROCOAT

EUROCOAT is a versatile non-VOC release agent specifically developed for the composites industry.

This semi-permanent release agent acts as a barrier between the mould and the composite part. The solid content is very high and the solvent content is only 3%. EUROCOAT is stable up to temperatures of 400°C (752°F). EUROCOAT is available in liquid form or as impregnated wipes SATWIPES C86 that meet AMS 3819 B and BMS 15-5 certifications. The SATWIPES C86 are ideal to control the product application and consumption

• 97% dry content
  • Very low Volatile Organic Compound (VOC) release
  • Improves users' safety
  • ONLY one layer of product application is necessary
  • Time saving in application because no waiting time for evaporation
• Non-migratory release system
  • No contaminating transfer onto the composite part
  • Easier removal of parts from mould
  • Lower mould maintenance costs
• Does not foul up the mould
  • No mould build-up
  • Easier mould regeneration
  • Lower mould maintenance costs compared to other release agents
• Re-application of Eurocoat is less frequent compared to any other release agent
  • Time saving in production
• Product available in liquid form or impregnated on Satwipes C86 15x23cm
  • Wipes:
    • Standardise product preparation operations
    • Reduce the quantity of product used